Cities › Chilliwack › Zones
R4-A zone in Chilliwack
Medium Density Multi-Unit Zone. Townhouse developments at medium density.
504lots in this zone on the map
5,968 m²median lot size (64,239 ft²)
99–25,611 m²smallest to largest lot
7.5 mmaximum height (25 ft)
The rules
| Name | Medium Density Multi-Unit Zone |
|---|---|
| Homes allowed | 50 dwelling units per ha (s.8.09(4)) |
| Floor space ratio | 0.85 |
| Floor space notes | FAR 0.85 residential (s.8.09(6)). |
| Height | 7.5 m (25 ft) |
| Height notes | Residential 7.5 m; urban ancillary 4 m (s.8.09(9)). |
| Lot coverage | 50% |
| Coverage notes | 50% all buildings; ancillary 30 m2 per unit. |
| Setbacks | front 6 m (20 ft), side 3 m (10 ft), rear 6 m (20 ft), flank 4.5 m (15 ft) |
| Setback notes | s.8.09(7): 4.5 m interior side where a private amenity area adjoins it. 9 m between units face-to-face / rear-to-rear, 3 m side-by-side (s.8.09(8)). Duplex only as part of a townhouse development. Height of 7.5 m is as printed in the Aug 2026 consolidation. |
| Bylaw sections | s.8.09 |
What you can use it for
TownhouseDuplex (with townhouses)Accessory home occupationSupportive recovery home
Example lots in R4-A
No addressed lots in this zone on the map.
Other zones in Chilliwack
Read from Zoning Bylaw 2020, No. 5000 (consolidated PDF posted 2026-08-18; amendment table ends with Bylaw No. 5571 adopted 2026-08-18) ↗, checked 2026-10-23. Summaries are our reading of the bylaw: confirm with Chilliwack before buying or designing. Page rebuilt October 25, 2026.