Cities › Maple Ridge › Zones
RT-2 zone in Maple Ridge
Ground-Oriented Residential Infill. Infill ground-oriented housing as triplex, fourplex and courtyard residential (s.616.1).
10lots in this zone on the map
914 m²median lot size (9,838 ft²)
884–1,148 m²smallest to largest lot
8 mmaximum height (26 ft)
The rules
| Name | Ground-Oriented Residential Infill |
|---|---|
| Homes allowed | Triplex (3), fourplex (4) or courtyard residential (up to 8 units by definition); secondary suite accessory (Bylaw 8117-2026). |
| Floor space ratio | 0.75 |
| Floor space notes | FSR 0.75 (s.616.5.1); gross floor area exemptions for walls, common areas, mechanical rooms and below-grade parking/storage (s.403.3). |
| Height | 8 m (26 ft) |
| Height notes | Principal 8.0 m, accessory 4.5 m (s.616.8). |
| Lot coverage | 45% |
| Coverage notes | 45% all buildings (s.616.6). |
| Setbacks | front 6 m (20 ft), side 2.25 m (7 ft), rear 7.5 m (25 ft), flank 4.5 m (15 ft) |
| Setback notes | Front 6.0 m for fourplex/courtyard, 7.5 m for triplex; Town Centre front 5.5 m; rear 7.5 m; interior side 2.25 m (up to 40% of wall length may be at 1.5 m); exterior side 4.5 m (s.616.7). Courtyard min 7.0 m wide (s.616.11.2). |
| Bylaw sections | s.616.1-616.11, 403.3 |
What you can use it for
Courtyard residentialFourplex residentialTriplex residentialSecondary suiteBoardingHome occupationShort-term rental
What BC law allows on these lots
- 4 homes (lots over 280 m²)6 lots
- 6 homes (near frequent transit)4 lots
Our estimate per lot under BC's Bills 44 and 47, from lot size, transit distance and the urban boundary.
Example lots in RT-2
No addressed lots in this zone on the map.
Other zones in Maple Ridge
RS-1RS-1bRM-1RURRS-3RM-2RS-2RM-3RM-4RM-5RST-SVRG-2RS-1aRS-1dSRSRSTRGRMHRM-6RE
Read from Maple Ridge Zoning Bylaw No. 7600-2019 (consolidated to 2026-07-28) ↗, checked 2026-10-21. Summaries are our reading of the bylaw: confirm with Maple Ridge before buying or designing. Page rebuilt October 25, 2026.