Cities › Port Moody › Zones
RS10 zone in Port Moody
Single Family Residential Cluster. To accommodate single detached residential cluster development on an acreage lot (s.8.14.1).
13lots in this zone on the map
23,743 m²median lot size (255,567 ft²)
23,743–23,743 m²smallest to largest lot
10 mmaximum height (33 ft)
The rules
| Name | Single Family Residential Cluster |
|---|---|
| Homes allowed | 1 home per 0.6 ha (no community water or sewer) or per 0.2 ha (community water, no sewer) |
| Floor space notes | No FAR. Density notwithstanding s.5.1.2(e): one dwelling unit per 0.6 ha without community water or sewer; one per 0.2 ha with community water but no community sewer (s.8.14.3(a)). Each dwelling at least 75 m2 residential floor area; buildings max 20 m long/wide and 3.0 m apart; non-residential buildings (other than garages) max 50 m2 each (s.8.14.6). Parking 2 spaces per unit (s.8.14.5). |
| Height | 10 m (33 ft) |
| Height notes | All buildings and structures 10.0 m; storeys not stated (s.8.14.3(b)). |
| Lot coverage | 35% |
| Coverage notes | All buildings and structures 35% total (s.8.14.3(c)). |
| Setbacks | front 7.5 m (25 ft), side 3 m (10 ft), rear 7.5 m (25 ft), flank 3 m (10 ft) |
| Setback notes | Front 7.5 m (principal), side 3.0 m and rear 7.5 m (all buildings) (s.8.14.3(d)-(f)); no separate exterior-side rule, flank taken as side. |
| Bonus density | No zone-level bonus. Citywide density bonus (s.7) applies to rezonings; pending Bylaw 3549 (2026) would replace it. |
| Bylaw sections | s.8.14.1-8.14.6, s.3.2.1 |
What you can use it for
Single detached residential (cluster)Home occupation Type A
Example lots in RS10
- 1300 Ioco Rd 23,743 m² · 255,567 ft²
Other zones in Port Moody
Read from City of Port Moody Zoning Bylaw, 2018, No. 2937 (consolidated for convenience; latest amendment listed: Bylaw 3331, adopted 2026-03-10) ↗, checked 2026-10-21. Summaries are our reading of the bylaw: confirm with Port Moody before buying or designing. Page rebuilt October 26, 2026.